Drawer Pulls

Dress up your drawers with this superfast DIY. These drawer pulls would be especially awesome on a little sideboard bar! Champagne corks are naturally knob-like, but some of the thicker wine corks would work just as well.

You will need:

* 1 drawer

* Power drill with 332" bit

* Champagne corks

*  18" × 2" flathead screw with washer

* Flathead screwdriver

  1. Remove existing hardware from drawer.
  2. Drill 1" into the cork from the flat end to make a pilot hole. Remove crumbs from hole.
  3. Hold the knob against the hole on the front of the drawer. Place the washer on the screw. From the inside, thread the screw through the hole in the drawer and into the cork. Tighten with the screwdriver until secure.