Materials list

Note: Use pressure-treated lumber.
6	2" x 2" x 8'
2	5/4 x 6" x 6' deck boards
1	2" x 6" x 6" board
1	3/16" x 2-1/2" dowel screw 3-1/2", 2-1/2", 2" and 1-5/8" galvanized deck screws
1	decorative finial

Tools

■ Table saw

■ Power drill

■ Duct tape

Tip

When attaching the spacers between the legs, set the pieces in place and drill pilot holes parallel to the spacers as shown above. Also offset the screws holding these spacers (at left) so they don’t run into each other.