PROJECT
Yarn Selection:
Wraps per inch___________________÷ 2 = sett _______ (Note: If your heddle has ten dents per inch you want a yarn that wraps about twenty times per inch for balanced plain weave. I recommend rounding up as you work.)
Warp Length:
________" (woven length of project) + 10% (take-up) = ________" + 24" (loom waste) =________+ 10" (for sampling if desired) = ________" length of each warp thread.
Total Number of Warp Threads Needed:
________" (woven width of project) + 10% (take-up) = ________" (width in the reed) × (number of ends per inch or sett) =________number of warp threads.
Amount of Yarn Needed for Warp:
________(number of warp threads) ×________" (warp length) =________" ÷ 36 =________' (the amount of yarn needed for warp in yards).
Amount of Yarn Needed for Weft:
________" (width of warp in reed) + 10% (take-up) ×________(picks per inch)=________" ×________" (total length of woven warp) =________÷ 36 =________' (the amount of yarn needed for weft in yards).
Finishing technique
Yarn SampleSource
Yarn SampleSource
Yarn SampleSource
Notes