Bibliography

94th U.S. Congress. Energy Policy and Conservation Act of 1975. Public Law 94–163. December 22, 1975.

95th U.S. Congress. National Energy Conservation Policy Act. Public Law 95–619. November 9, 1978. 102nd U.S. Congress. Energy Policy Act of 1992. H.R. 776. October 24, 1992

109th U.S. Congress. Energy Policy Act of 2005. Public Law 109–58. August 8, 2005

110th U.S. Congress. Energy Independence and Security Act of 2007. Public Law 110–140.December 19, 2007.

111th U.S. Congress. American Recovery and Reinvestment Act of 2009. H.R.-1. January 6, 2009.

114th U.S. Congress. Energy Efficiency Improvement Act of 2015. Public Law 114–11. April 30, 2015.

AIA Knowledge Resources Staff. Defining the Architect’s Basic Services. American Institute of Architects, July 2007. www.aia.org/aiaucmp/groups/secure/documents/pdf/aiap026834.pdf.

Alliance Commission on National Energy Efficiency Policy. The History of Energy Efficiency. Washington, DC: Alliance to Save Energy, 2013.

American Institute of Architects. “AIA Document G202–2013, Project Building Information Modeling Protocol Form.” www.aia.org/aiaucmp/groups/aia/documents/pdf/aiab099086.pdf.

——. “Practicing Architecture: 2030 Commitment.” www.aia.org/practicing/2030Commitment.

——. Integrated Project Delivery: A Guide, volume 1. Washington, DC: AIA, 2007

American Institute of Architects Research Corporation. Regional Guidelines for Building Passive Energy Conserving Homes. Washington, DC: U.S. Dept. of Housing and Urban Development, 1978.

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., “ASHRAE Climate Data Center.” www.ashrae.org/resources--publications/bookstore/climate-data-center.

——. “A Brief History of the ASHRAE Handbook.” www.ashrae.org/resources--publications/a-brief-history-of-the-ashrae-handbook.

——. “Building EQ, Building Energy Quotient.” www.buildingenergyquotient.org/what-is-bEQ.html.

——. ANSI/ASHRAE/IESNA Standard 90.1–2007, Energy Standard for Buildings

Except Low-rise Residential Buildings. Atlanta: ASHRAE, 2007.——. ANSI/ASHRAE/IES Standard 90.1–2013: Energy Standard for Buildings

Except Low-Rise Residential Buildings. Atlanta, GA: ASHRAE, 2013.

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. and U.S. Green Building Council. ANSI/ASHRAE/IES/USGBC Standard 189.1–2014: Standard for the Design of High-Performance Green Buildings. Atlanta, GA: ASHRAE, 2014.

Anderson, Ren, Scott Horowitz, Adam Courtney, and Justin Spencer. BEopt Software for Building Energy Optimization: Features and Capabilities. Golden, CO: National Renewable Energy Laboratory, 2006.

Appelbaum, Alec. AIA 2030 Commitment, 2014 Progress Report. Washington, DC: AIA, 2015.

Attia, Shady, Elisabeth Gratia, André de Herde, and Jan L.M. Hensen. “Simulation-Based Decision Support Tool for Early Stages of Zero-Energy Building Design.” Energy and Buildings 49, 2012. doi:10.1016/j.enbuild.2012.01.028.

Balcomb, J. Douglas, ed. Passive Solar Buildings. Cambridge, MA: MIT Press, 1992

Brown, G.Z., and Mark DeKay. Sun, Wind & Light: Architectural Design Strategies, 3rd edn. Hoboken, NJ: John Wiley & Sons, 2014.

Buckley, Liam. “New-Trend Natural Ventilation Potential & Analytics for Various Climates in Canada.” In eSIM Conference Proceedings. 2014. www.ibpsa.org/proceedings/eSimPapers/2014/1A.2.pdf.

Building Research Establishment Ltd. “BREEAM,” www.breeam.com.

Carter, Jimmy. “National Energy Program Fact Sheet on the President’s Program.”

The American Presidency Project. Gerhard Peters and John T. Woolley, April 20, 1977. www.presidency.ucsb.edu/ws/?pid=7373.

——. “Executive Order 12003, Relating to Energy Policy and Conservation.” July 20, 1977.

Center for the Built Environment. “CBE Thermal Comfort Tool.” May 1, 2014. www.cbe.berkeley.edu/research/thermal-tool.htm.

Cherry, Edith, and John Petronis. “Architectural Programming.” In Whole Building Design Guide. Washington, DC: National Institute of Building Sciences, 2009. www.wbdg.org/design/dd_archprogramming.php.

Clinton, William. “Greening the Government Through Efficient Energy Management.” Federal Register 64, no. 109 (1999).

Crawley, Drury B., Jon W. Hand, Michaël Kummert, and Brent T. Griffith. “Contrasting the Capabilities of Building Energy Performance Simulation Programs.” Building and Environment 43, no. 4 (2008): 661–673.

Crawley, Drury B., Jon W. Hand, Michaël Kummert, Brent T. Griffith, and Linda K. Lawrie. “Rethinking the TMY: Is the ‘Typical’ Meteorological Year Best for Building Performance Simulation?” In Proceedings of BS2015: 14th Conference of IBPSA, edited by Jyotirmay Mathur and Vishal Garg. Hyderabad, India, December 7–9, 2015.

Depecker, P., C. Menezo, J. Virgone, and S. Lepers. “Design of Buildings Shape and Energetic Consumption.” Building and Environment 36, no. 5 (2001): 627–635. doi:10.1016/S0360–1323(00)00044–5.

Deru, M., and P. Torcellini. Source Energy and Emission Factors for Energy Use in Buildings. Golden, CO: NREL, 2007.

Deru, Michael, Kristin Field, Daniel Studer, Kyle Benne, Brent Griffith, Paul Torcellini, Bing Lie, Mark Halverson, Dave Winiarski, Michale Rosenberg, Mehry Yazdanian, Joe Huang, and Drury Crawley, U.S. Department of Energy Commercial Reference Building Models of the National Building Stock. Golden, CO: National Renewable Energy Laboratory, 2011. www.nrel.gov/docs/fy11osti/46861.pdf.

Energy Modeling Working Group. AIA Guide to Integrating Energy Modeling in the Design Process. Washington, DC: AIA, 2013.

EnergyPlus, “Weather Data for Simulation,” https://energyplus.net/weather/simulation

——, “Weather Data,” https://energyplus.net/weather.

Franconi, Ellen Kendra Tupper, Black Herrschaft, Craig Schiller, and Robert Hutchinson. Building Energy Modeling for Owners and Operators: A Guide to Specifying and Securing Services. Boulder, CO: Rocky Mountain Institute, 2014.

G., John. “Weather—One of the ‘Big Uglies’ in Energy Modeling!”July28, 2011. http://blog.iesve.com/index.php/2011/07/28/weather-one-of-the-in-energy-modelling.

Gatley, D.P. Understanding Psychrometrics, 3rd edn. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2013.

Gold, Rachel, and Steve Nadel. Assessing the Harvest: Implementation of the Energy Efficiency Provision in the Energy Policy Act of 2005. Washington, DC: American Council for an Energy-Efficient Economy, 2011.

Gratia, Elisabeth, and A. de Herde. “Design of Low Energy Office Buildings.” Energy and Buildings 35, no. 5 (2003): 473–491. www.sciencedirect.com/science/article/pii/S0378778802001603.

Green, Amanda. “A Brief History of Air Conditioning.” Popular Mechanics (January 1, 2015). www.popularmechanics.com/home/how-to/a7951/a-brief-history-ofair-conditioning-10720229.

Green Building Initiative. “Green Globes Certification.” www.thegbi.org/green-globes-certification.

Grinberg, Michael, and Adam Rendek. “Architecture & Energy in Practice: Implementing an Information Sharing Workflow.” In 13th Conference of International Building Performance Simulation Association, edited by Etienne Wurtz. Chambery, France: IBPSA, 2013.

Hachem, Caroline, Andreas Athienitis, and Paul Fazio, “Investigation of Solar Potential of Housing Units in Different Neighborhood Designs.” Energy and Buildings 43, no. 9 (2011): 2262–2273. doi:10.1016/j.enbuild.2011.05.008.

Hayter, Sheila J., Paul Torcellini, Richard B. Hayter, and Ron Judkoff, “The Energy Design Process for Designing and Constructing High-Performance Buildings.” Clima 2001 World Congress, September 15–18, 2001.

Hemsath, Timothy. “Conceptual Energy Modeling for Architecture, Planning and Design: Impact of Using Building Performance Simulation.” In 13th Conference of International Building Performance Simulation Association, edited by Etienne Wurtz. Chambery, France: IBPSA, 2013.

Hemsath, Timothy L., and Kaveh Alagheband Bandhosseini. “Sensitivity Analysis Evaluating Basic Building Geometry’s Effect on Energy Use.” Renewable Energy 76 (2015): 526–538. doi:10.1016/j.renene.2014.11.044.

Holtz, Michael. “Building Integration.” In Passive Solar Buildings, edited by J. Douglas Balcomb. Cambridge, MA: MIT Press, 1992.

Hong, Tianzhen, Wen-Kuei Chang, and Hung-Wen Lin. “A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30–year Actual Weather Data.” Applied Energy 111 (2013).

Hootman, Thomas. Net Zero Energy Design: A Guide for Commercial Architecture. Hoboken, NJ: John Wiley & Sons, 2013.

IES Daylight Metrics Committee. Approved Method: IES Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE). IES, LM-83–12. New York, NY: IES, 2012. Intergovernmental Panel on Climate Change (IPCC). Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, edited by R.K. Pachauri and L.A. Meyer. Geneva: IPCC, 2014.

International Building Performance Simulation Association-USA. “BEST Directory.” www.buildingenergysoftwaretools.com.

——. “History of Building Energy Modeling.” http://bembook.ibpsa.us/index.php?title=History_of_Building_Energy_Modeling.

International Code Council. “International Green Construction Code.” www.iccsafe.org/international-green-construction-code.

——. 2006 International Building Code. Country Club Hills, IL: International Code Council, Inc., 2006.

——. 2009 International Energy Conservation Code (IECC). Country Club Hills,

IL: International Code Council, Inc., 2009.

International Living Future Institute. “Living Building Challenge.” http://living-future.org/lbc/about.

Karolides, Alexis. “Affordable Housing with Unaffordable Energy Bills.” RMIOutlet. August 19, 2013. http://blog.rmi.org/blog_2013_08_19_affordable_housing_with_unaffordable_energy_bills.

Kesik, Ted J. “Building Enclosure Design Principles and Strategies.” In Whole Building Design Guide. Washington, DC: National Institute of Building Sciences, 2014. www.wbdg.org/resources/buildingenclosuredesignstrategies.php.

Kjellstrom, T., S. Friel, J. Dixon, C. Corvalan, E. Rehfuess, D. Campbell-Lendrum, and J. Bartram. “Urban Environmental Health Hazards and Health Equity.” Journal of Urban Health: Bulletin of the New York Academy of Medicine 84, Suppl. 1 (2007): 86–97. http://doi.org/10.1007/s11524–007–9171–9

Klonis, Kyle, Alejandro Gamas, and Karen Kensek, “Passive Performance and Building Form: An Optimization Framework for Early-Stage Design Support.” Solar Energy 125 (2016): 161–179.

Kłysik, Kazimierz, and Krzysztof Fortuniak. “Temporal and Spatial Characteristics of the Urban Heat Island of Łódź, Poland.” Atmospheric Environment 33, no. 24 (1999): 3885–3895.

Knowles, Ralph. Energy and Form. Cambridge, MA: MIT Press, 1994

——. “The Solar Envelope: Its Meaning for Energy and Buildings.” Energy and Buildings 35 (2003).

Ko, Y. “Urban Form and Residential Energy Use: A Review of Design Principles and Research Findings.” Journal of Planning Literature 28 (2013): 327–351. doi:10.1177/0885412213491499.

Kottek, Markus, Jurgen Grieser, Christoph Beck, Bruno Rudolf, and Franz Rubel. “World Map of the Köppen-Geiger Climate Classification Updated.” Meteorology Z 15, no. 3 (2009): 259–263. doi: 10.1127/0941–2948/2006/0130.

Lawrence Berkeley National Laboratory. “Building Performance Database.” https://bpd.lbl.gov.

Lstiburek, Joseph. “Thermodynamics: It’s Not Rocket Science.” In Building Science Insights. Westford, MA: Building Science Corporation, 2009. http://buildingscience.com/documents/insights/bsi-021–thermodynamics-its-not-rocket-science.

MacLeamy, Patrick. The Future of the Building Industry (3/5): The Effort Curve. HOK Network, 2014. https://youtu.be/9bUlBYc_Gl4.

Mankins, Paul D. “Design Phases.” In The Architects Handbook of Professional Practice, 15th edn, edited by R.L. Hayes. Hoboken, NJ: John Wiley & Sons, 2014.

Mazria, Edward. The Passive Solar Energy Book. Emmaus, PA: Rodale Press, 1979.

National Renewable Energy Lab. “System Advisor Model (SAM): Create TMY3 File.” www.nrel.gov/analysis/sam/help/html-php/index.html?weather_create_tmy3.htm.

National Solar Radiation Data Base. “1991–2005 Update: Typical Meteorological Year 3.” http://rredc.nrel.gov/solar/old_data/nsrdb/1991–2005/tmy3.

Nicol, Fergus. The Limits of Thermal Comfort: Avoiding Overheating in European Buildings. London: CIBSE, 2013. http://app.knovel.com/hotlink/toc/id:kpTLTCAOE4/the-limits-of.

Oak Ridge National Laboratory. “Innovations in Buildings: WUFI.” http://web.ornl.gov/sci/buildings/tools/wufi/.

Olgyay, Aladar, and Victor Olgyay. Solar Control and Shading Devices. Princeton, NJ: Princeton University Press, 1977.

Olgyay, Victor. Design for Climate: Bioclimatic Approach to Architectural Regionalism. Princeton, NJ: Princeton University Press, 1963.

Østergård, Torben, Rasmus L. Jensen, and Steffen E. Maagaard. “Building Simulations Supporting Decision Making in Early Design – A Review.” Renewable and Sustainable Energy Reviews 61 (2016): 187–201. doi:10.1016/j. rser.2016.03.045.

Overbey, Daniel. “Every Energy Model is Wrong: And Here is Why They are Indispensable.” August 5, 2016. http://danieloverbey.blogspot.com/2014/08/every-energy-model-is-wrong-and-here-is.html.

Passe, Ulrike, and Francine Battaglia. Designing Spaces for Natural Ventilation: An Architect’s Guide. New York, NY: Routledge, 2015. “performLive,” http://performlive.com/design_brief.pdf (accessed February 25, 2016).

RapidTables.com. “Lux to Watts Calculator.” www.rapidtables.com/calc/light/lux-to-watt-calculator.htm.

Reeves, Thomas, Svetlana Olbina, and Raja R.A. Issa, “Guidelines for Using Building Information Modeling for Energy Analysis of Buildings.” Buildings 5, no. 4 (2015): 1361–1388.

Reinhart, Christopher. “UMI: Urban Modeling [v2.0].” http://urbanmodellinginterface.ning.com.

Residential Energy Services Network (RESNET). “The History of RESNET.” www.resnet.us/about/our-history.

Rodrigues, Eugenio, Ana R. Amaral, Adelio R. Gaspar, and Alvaro Gomes. “How Reliable are Geometry-based Building Indices as Thermal Performance Indicators?” Energy Conversion and Management 101 (2015): 561–578. http://doi.org/10.1016/j.enconman.2015.06.011.

Schiavon, Stefano, Tyler Hoyt, and Alberto Piccioli. “Web Application for Thermal Comfort Visualization and Calculation According to ASHRAE Standard 55.” Building Simulation 7, no. 4 (2014): 321–334. http://dx.doi.org/10.1007/s12273–013–0162–3.

Scott, Jodi. Proposed ASHRAE Energy Simulation Standard Open for Public Review. Atlanta, GA: ASHRAE, 2016: www.ashrae.org/news/2016/proposed-ashrae-energy-simulation-standard-open-for-public-review.

Straube, John. “BSI-061: The Function of Form—Building Shape and Energy.” Building Science Insight, June 15, 2012. http://buildingscience.com/documents/insights/bsi-061–function-form-building-shape-and-energy?searchterm=form%2520matters.

Szokolay, Steven. Introduction to Architectural Science: The Basis of Sustainable Design, 3rd edn. London: Routledge, 2014.

Ternoey, Steven, Larry Bickle, Claude Robbins, Robert Busch, and Kitt McCord, The Design of Energy-Responsive Commercial Buildings. Chichester: Solar Energy Research Institute and John Wiley & Sons, 1985.

The Weather Company, LLC. “Weather Underground.” www.wunderground.com.

The White House, Office of the Press Secretary. “FACT SHEET: Reducing Greenhouse Gas Emissions in the Federal Government and Across the Supply Chain.” March 19, 2015. www.whitehouse.gov/the-press-office/2015/03/19/fact-sheet-reducing-greenhouse-gas-emissions-federal-government-and-acro.

Tschumi, Bernard, Joseph Abram, Sylvaine Agacinski, Veronique Descharrieres, Alain Fleischer, Alain Guiheux, Sylvia Lavin, Alain Pelissier, and Dominique Rouillard. “Introduction.” In Tschumi Le Fresnoy: Architecture In/Between. New York, NY: The Monacelli Press, 1999.

Tupper, Kendra, and Caroline Fluhrer. “Energy Modeling at Each Design Phase: Strategies to Minimize Design Energy Use.” In Proceedings of SimBuild. New York: IBPSA, 2010.

U.S. Department of Energy, “U.S. Energy Information Administration.” www.eia.gov.

——. “Advanced Energy Design Guides.” http://energy.gov/eere/buildings/advanced-energy-design-guides.

——. “Building Energy Asset Score.” http://energy.gov/eere/buildings/building-energy-asset-score.

——. “Building Energy Codes Program: Commercial Prototype Building Models.” www.energycodes.gov/commercial-prototype-building-models.

——. “Building Energy Modeling.” http://energy.gov/eere/buildings/building-energy-modeling.

——. “Building Technologies Program Research, Development, Regulatory and Market Introduction Plan: Planned Activities for 2008−2012.” http://apps1.eere.energy.gov/buildings/publications/pdfs/corporate/myp08complete.pdf.

——. “Recovery Act.” www.energy.gov/recovery-act.

——. “Residential Prescriptive Requirements, 2009 International Energy Conservation Code (IECC).” https://energycode.pnl.gov/EnergyCodeReqs.

U.S. Energy Information Administration. “Commercial Building Energy Consumption Survey (CBECS).” www.eia.gov/consumption/commercial.

U.S. Environmental Protection Agency. “Energy Star Certification for Your Building.” www.energystar.gov/buildings/facility-owners-and-managers/existing-buildings/earn-recognition/energy-star-certification.

——. “EPA’s Energy Star Target Finder.” www.energystar.gov/buildings/service-providers/design/step-step-process/evaluate-target/epa%E2%80%99s-target-finder-calculator.

——. “Heat Island Effect.” www.epa.gov/heat-islands.

——. “History of the ENERGY STAR Guidelines for New Homes.” www.energystar.gov/index.cfm?c=new_homes.nh_history.

U.S. Green Building Council. “LEED.” www.usgbc.org/leed.

Vitruvius, Ten Books on Architecture. Translated by Hicky Morgan. Cambridge, MA: Harvard University Press, 1914.

Walker Art Center. “Architecture as Energy: Issues in Architecture III.” Design Quarterly, 103 (1977).

Watson, Donald, and Kenneth Labs. Climatic Building Design: Energy-Efficient Building Principles and Practices. New York: McGraw-Hill, 1983.

Weather Analytics. “Weather Analytics,” www.weatheranalytics.com/wa.

Wilcox, S. and W. Marion. User’s Manual for TMY3 Data Sets. Golden, CO: National Renewable Energy Laboratory, 2008.

Wilson, E., C. Engebrecht Metzger, S. Horowitz, and R. Hendron. 2014 Building America House Simulation Protocols. Golden, CO: NREL, 2014.

Yeang, Ken. Ecodesign: A Manual for Ecological Design. Chichester: John Wiley & Sons, 2006.