Process Of Building The Attribute Title Block

Step 1: Make the titles available for Title Block (note that Title Block must be drawn in a 1:1 scale)

Step 2: Build 10 Attribute by only initializing 1 Attribute and then copying it to the remaining 9 Attribute

Now, we will build the first Attribute is CLIENT

- Type ATT ↙ command and enter the content as shown below:

Tag	Name of Attribute (required)
Prompt	Content appears at the command prompt (may be left blank)
Default	The default content will be displayed if we do not enter anything (can be left blank)
Justification	Alignment, optional
Text Style	The type of Text Style of this text Attribute
Text height	The height of the text displayed

- Press OK

- Move the CLIENT Attribute to the desired position in the Title Block.

- Copy the CLIENT Attribute  to the remaining 11 positions

Now start editing each Attribute in arbitrary order by double-clicking on each Attribute and modifying the Tag and Prompt.

-Edit for 9 Attribute are copied out there to get 10 different Attribute

Step 3: Build 1 Attribute to insert Field for DRAWING tag

- Type ATT ↙ command and enter the content as shown below.

- At Default , click the Insert Field button / Select Current SheetTitle / OK

- Get the following results:

- Click OK to finish

- Put this Attribute under the content Name drawings in Title Block.

And we get a preliminary title block as follows:

-            Quick Properties dialog box: