Chapter 8 – Copy Layout

Because we will have to work on a lot of layout drawings, each of the drawings can't make the effort to reset from the beginning, which we will use a quick method is "copy layout" from the first sample Layout. Moreover, when copying the sample layout, all layouts will have the same Page Setup Manager setting so it will be easy for mass printing later.

After you have established a complete sample layout drawing (AR01:1FAP), we need to duplicate this Layout in enough numbers: the total number of Layout needs to be equal to the number of drawings to print.

We need the following 2 preparations:

- Go to Page Setup Manager to check again if the Layout of the template has been set up in Curved Paper (A3) or not. If you see after the name Layout template with the name of the paper size in parentheses, it is already Set Current.

Note : The sample layout must be set to the current paper size so that copying the sample layout will make sense.

- Unlock the ViewPort frame of the template Layout tab. The purpose is only so that the following Layout does not bother to unlock a series of ViewPort frames after copying.

How to proceed with Copy Layout as follows:

- Right-click the name of the sample Layout AR01:1FAP

- Choose Move or Copy

- Click “ Create a copy ” / OK

- Do the same to copy out multiple Layout drawings.

You can copy multiple Layout at the same time by choosing Layout: select the first Layout, hold Shift to the last Layout and do the same. Then, the Layout will default to all settings set similar to the original sample Layout.

At this time, check Page Setup to see that all Layout drawings have been set with 1 Page Setup set to A3.