Sketching a Revolve Profile

Now, you will construct a sketch for the revolved feature.

1. On the CommandManager, click Sketch > Sketch.
2. Click on the right plane.
3. Activate the Line tool and place the pointer on the sketch origin.
4. Move the pointer upward and notice a dotted line.
5. Click along the dotted line to specify the start point of the line.

1. Move the pointer upwards. You will notice that the Vertical relation symbol appears.
2. Click to draw a vertical line.

1. Move the pointer toward left. You will notice that the Horizontal relation symbol appears.
2. Click to draw a horizontal line.

1. Complete the sketch by constructing the other lines.

1. On the CommandManager, click Sketch > Line > Centerline.

1. Draw a horizontal line passing through the horizontal axis of the coordinate system.

1. Activate the Smart Dimension tool and apply to two horizontal dimensions (refer to the Adding Dimensions section of Tutorial 1).

1. Click on the centerline and bottom horizontal line.

1. Move the pointer downwards, and then towards right. Click to position the dimension.

1. Type-in 30 in the Modify box and click OK.

1. Create other symmetric dimensions, as shown.

1. Click Exit Sketch.