Tutorial 4

In this tutorial, you construct a Key by performing the following operations:

• Constructing an Extruded Boss
• Applying draft

Constructing Extruded Boss

1. To open a new part, click File > New on the menu bar.
2. On the New SOLIDWORKS Document dialog, click the Part button.
3. Click OK.
4. On the CommandManager, click Features > Extruded Boss/Base.
5. Click on the front plane.
6. Construct the sketch, as shown in figure.

1. Click Exit Sketch.
2. On the Boss-Extrude PropertyManager, under the Direction 1 section, set End Condition to Mid Plane.
3. Set the Depth value to 50.
4. Click OK to construct the extruded boss.