Move and Rotate Entities

The Move Entities tool moves a selected object(s) from one location to a new location without changing its orientation. To move objects, you must activate this tool and select the objects from the graphics window. After selecting objects, you must define the ‘base point’ and ‘destination point’.

1. Create the sketch, as shown below.
2. Turn ON the Shaded Sketch Contours icon on the Sketch tab of the CommandManager.

1. Click Sketch > Move Entities on the CommandManager.
2. Select the square located at the right-side by clicking inside it.
3. On the PropertyManager, under the Parameter section, select From/To.
4. Click in the Start point selection box, and then select the lower corner point as the base point.
5. Move the pointer toward right and pick a point as shown below. This moves the square to the new location.