Trim Entities

When an object intersects with another object, you can remove its unwanted portion by using the Trim Entities tool.

1. Click Sketch > Trim Entities on the CommandManager.
2. On the PropertyManager, click the Power trim icon.
3. Press and hold the left mouse button and drag the pointer across the unwanted portions of the circles as shown.

1. On the PropertyManager, click the Trim Closest icon.
2. Click on the inner portions of the circles, as shown.

1. Click Close Dialog on the PropertyManager.
2. On the CommandManager, click Sketch > Arc drop-down > 3 Point Arc.
3. Select three points in the graphics window, as shown.

1. Create other arcs using the 3 Point Arc tool, as shown.

1. On the CommandManager, click Sketch > Trim Entities.
2. On the PropertyManager, click the Trim away inside icon.
3. Click on the boundary entities, as shown.
4. Click on the entities to trim, as shown.

The inner portions of the entities are trimmed.

1. Press Ctrl+Z twice to undo the trim operations (or) click Undo twice on the Quick Access Toolbar.
2. Activate the Trim Entities tool and click the Trim away outside icon on the PropertyManager.
3. Click on the boundary and trim entities. The outer portions are trimmed, as shown.

1. Undo the trim operations.
2. Activate the Trim Entities tool and click the Corner icon on the PropertyManager.
3. Click on the intersecting entities, a shown.

The entities are trimmed to form a corner.