Constructing a Revolved Cut

1. To construct a revolved cut, click Features > Revolved cut on the CommandManager.
2. Expand the FeatureManager Design Tree and select the right plane.
3. Under the FeatureManager Design Tree, click the right mouse button on the sketch and select Normal To.

1. On the CommandManager, click Sketch > Convert Entities.
2. Click on the horizontal edge of the model. Click OK.

1. Activate the Line command.
2. Select the left endpoint of the converted edge.
3. Move the pointer vertically downward and click.
4. Move the pointer horizontally toward right and click.
5. Move the pointer upward and select a point on the converted edge.

1. On the CommandManager, click Sketch > Trim Entities.
2. On the PropertyManager, click the Power Trim icon.
3. Click and drag the left mouse button across the unwanted portion of the converted edge, as shown. Next, press Esc.

1. Select the inclined and horizontal lines, move the pointer toward left and click to place the dimension.

1. Type 110 and press Enter.
2. Select the upper horizontal line, move the pointer upward and click to place the dimension. Type 13 and press Enter.
3. Select the lower horizontal line, move the pointer downward and click to place the dimension. Type 5 and press Enter.
4. Create a horizontal centreline passing through the origin.

1. Click Exit Sketch and click OK.