Adding Chamfers

1. To add a chamfer, click Features > Fillet Chamfer on the CommandManager.
2. On the PropertyManager, select Distance Distance.
3. Select Asymmetric from the Chamfer Method drop-down available in the Chamfer Parameters section.
4. Type-in 45 and 25 in the Distance 1 and Distance 2 boxes.
5. Click on the corner edge of the first feature.

1. Click OK to add the chamfer.

1. Activate the Chamfer tool.
2. On the PropertyManager, select Angle distance.
3. Type-in 45 in the Distance and Angle boxes.
4. Click on the corner edge of the second feature.

1. Click OK.