Creating the Extruded surface

1. On the CommandManager, click the right mouse on anyone of the tabs and select Surfaces.
2. Click Surfaces > Extruded Surface on the CommandManager and select the Right Plane.

1. On the View Heads up toolbar, click View Orientation > Normal To.

1. Click Sketch > Spline on the CommandManager.

1. Create a spline, as shown in figure.

1. Apply dimensions to the spline, as shown below.

1. Click Exit Sketch.
2. Set the End Condition type to Mid Plane.
3. Type 215 in the Depth box and click OK.