This is a much misused knot. Equal loads (or at least nearly equal) should be applied continuously to both sides otherwise it may roll and eventually undo. Therefore it should not be used to moor a boat as all the load will be on one side and the boat could, sooner or later, be lost.
To form the Hitch, the working end is either passed round and round the object the line is being hitched to or, if the top is open, preformed loops are dropped over as shown. This method is easier but not always possible. With laid rope, form loops by twisting with the lay.
Clove Hitches used to tie halyards off the mast.
