Create a Diagonal Line Through the Center

Supplies:

Soap recipe of your choice

sifter

2 tsp powder pigment

Set up your soap mold at an angle (I use two bars of soap, one on each side, to support my mold). Mix your soap following the recipe of your choice until medium trace is achieved. Pour half of the soap into mold, making sure your soap reaches the bottom corner, otherwise your angle and soap will be off-kilter. Gently sprinkle your powder through the sifter across the top of your soap. Next, carefully spoon the rest of your soap over the top of powder layer. Spread this gently and evenly. Now set your soap mold in an upright position to harden for 12 hours. Remove from mold and paper and cut. Enjoy!!