What fastener is used to create a semipermanent assembly?
Go to Back
What tool is used to drive pins out of holes and follow the pins through the holes?
Go to Back
What tool is used to make a small indentation as a starting mark for a drilling operation?
Go to Back
What is a common distinction between a screw and a bolt?
Go to Back
thread onto bolts to clamp assemblies together.
Go to Back
The UNC (Unified National Coarse) and UNF (Unified National Fine) classifications define fasteners based on which measure?
Go to Back
A hacksaw is made to cut on the stroke.
Go to Back
Why is the diameter of a fastener critical to a task?
Go to Back
Before soldering an electrical connection, it is wise to make a(n) connection.
Go to Back
A welder will require more electric current if either the or the is larger.
Go to Back
Why must welders wear helmets and protective clothing?
Go to Back
MIG (metal inert gas) welding is also known as welding.
Go to Back
When would a technician use adjustable joint pliers?
Go to Back
Which tool is frequently used to cut wire and small cables?
Go to Back
Which tool is often used with a back saw to make even cuts at specific angles?
Go to Back
A right-hand drill bit is made to cut while rotating in a(n) direction.
Go to Back
What is the main advantage of a soldering gun over a soldering iron?
Go to Back
Why does a combination wrench have both a box end and an open end?
Go to Back
What type of screwdriver would be used with a screw with this type of head?
Go to Back
What type of saw is embedded within a table and has a rotating blade?
Go to Back
What type of screwdriver would be used with a screw with this type of head?
Go to Back
are smoothing tools that come in flat, half-round, and triangular shapes, among others.
Go to Back
Aside from oxyacetylene welding, the other major type of welding is .
Go to Back
pliers are used for cutting and bending heavy-gauge wire.
Go to Back
Binding surfaces together with a molten metal alloy is called .
Go to Back
A saw is used for making fine, straight cuts.
Go to Back
Which are used for finer finishing—rasps or files?
Go to Back
What type of screwdriver would be used with a screw with this type of head?
Go to Back
What type of saw is used for cutting metal?
Go to Back
calipers measure the exterior dimensions of an object; calipers measure interior dimensions.
Go to Back
Oxyacetylene welding uses a torch fueled by a mixture of and .
Go to Back
A can be struck with a hammer in order to drive home a fastener without damaging the work surface.
Go to Back
A nut/bolt has external threads, while a nut/bolt has internal threads.
Go to Back
saws are used to cut across the grain of a piece of wood, while saws are used to cut with the grain.
Go to Back
A(n) can be used to smooth a large wooden surface.
Go to Back
A(n) can be struck with a hammer in order to make holes or to drive home fasteners.
Go to Back
A(n) saw can be used to bore circular cuts in wood.
Go to Back
Crosscut saws have teeth that are , while rip saws have teeth that are .
Go to Back
An adjustable wrench is also called a(n) .
Go to Back
Why would someone use a rubber or wooden mallet?
Go to Back
Adjustable joint pliers are used to grip larger-diameter objects and are also known as .
Go to Back
Combination slip joint pliers are adjustable at the .
Go to Back
What is the difference between a ball-peen hammer and a claw hammer?
Go to Back
A castellated nut uses a(n) to hold it in place.
Go to Back
An air wrench combines torque with to loosen fasteners.
Go to Back
pliers are used for gripping very small objects.
Go to Back
A worker would use a to join two pieces of wood while glue used to bind them dries.
Go to Back
What is the difference between a tubular spirit level and a bullseye spirit level?
Go to Back
What type of screwdriver would be used with a screw with this type of head?
Go to Back
A drill’s chuck is identified by the diameter drill bit it will hold.
Go to Back
A(n) can be struck with a hammer in order to make long cuts.
Go to Back
A(n) is used to clean a surface that will be soldered.
Go to Back
Snap rings are usually installed and removed using .
Go to Back
A(n) holds a piece of work to a surface such as a worktable.
Go to Back
A(n) saw is used to make fine, curving cuts.
Go to Back
A(n) saw is a powered saw that sits on a table and can be used to make angled cuts.
Go to Back
A(n) is the best tool for measuring small objects to the thousandth of an inch.
Go to Back
Instead of using a wrench to loosen a fastener in a tight space, a worker could use a with a .
Go to Back
A measuring device with two arms that meet at a 90-degree angle is called a(n) .
Go to Back
A hammer with a 16- to 20-ounce head is typically used for what purpose?
Go to Back