Mirror Entities

The Mirror Entities tool creates a mirror image of objects. You can create symmetrical sketches using this tool.

1. Create a horizontal centerline passing through the origin.

1. On the Command Manager, click Sketch > Mirror Entities.
2. Drag a selection box covering all the sketch entities.

1. On the PropertyManager, click in the Mirror about box and select the centerline passing through the origin.
2. Click OK to mirror the selected entities.

1. On the CommandManager, click Sketch > Arc drop-down > Tangent Arc.
2. Select the start point of the arc as shown below.

1. Move the pointer and select the end point of the arc, as shown below.

1. Click OK on the PropertyManager.