Log In
Or create an account -> 
Imperial Library
  • Home
  • About
  • News
  • Upload
  • Forum
  • Help
  • Login/SignUp

Index
Introduction Chapter 1 Why Use Hand Tools The Myths of Hand Tools The way to begin Not a Rejection of Electricity Chapter 2 Buy Your Hand Tools Your Shopping List Chisels Backsaw and Coping Saw Planes Scrapers Blend Marking Gauge Sliding Bevel Gauge Bargaining Chapter 3 Hand Tool Shop Room to Plane Space to Saw Tool Storage Space Lumber Storage Space Sharpening Space Lighting Your Workspace An Inviting Shop Conclusion Chapter 4 Materials for Projects Solid-Wood Lumber Reading the Grain End grain Face grain Edges The place to purchase Solid-Wood Lumber Storing Lumber Sheet Goods Plywood MDF Hardboard Beadboard The place to get Sheet Goods Fasteners Wood Screws Lag Screws Brads and Finishing Nails Glues Yellow Glue Epoxy Polyurethane Cyanoacrylate Abrasives Sanding Bare Wood Sanding Paint and Additional Synthetic Steel Wool Stains Prestain Conditioners Pigment Stains Dye Stains Gel Stains Finishes Oil exfoliates Oil/Wax Finishes Waxes Shellacs Varnishes Gel Varnishes Oil/Varnish Mixtures Water-Based Clear-Coat Finishes Nice Paint Finishes Putties and Fillers Brushes Acid Brushes Cheap NaturalBristle Brushes Foam Brushes Other Finishing Supplies Tack Cloths Paper Towels and Rags Solvents Tapes Masking Tape Double-Sided Tape Chapter 5 The Easy Chair Project Construction the Chair Construct the Side Assemblies Figuring from the stretchers Laying from that the uprights Countersinking that the uprights for stringing Fastening the uprights into the stretchers Connect the Side Assemblies together with the Lower Crosspieces Countersinking that the crosspieces Joining three crosspieces to a single side Install the Seat Supports Installing the rear seat support. Installing front chair support Install the Back and Seat Planks Cutting on the back and seat boards Installing the centre back board Installing the side planks. Installing the chair boards Install the Back Cleat Install the Arms Closing Smoothing and Shaping Finishing Chapter 6 The Bookcase Project Construction the Bookcase Cut the Parts to Style Lay the Dadoes and Rabbets Laying the sides out Laying out the surface Rout the Rabbets Cutting rabbets to your sides Cutting rabbets to the upper Rout the Dadoes Cutting dadoes for the Sides Cutting on dadoes for the top Rout the Edge Remedy on the Best Way Square that the Stopped Dadoes Fasten cleats into the sides. Drill Pilot Holes Cut the Aprons Build the Case Dry-fitting Glueing Put on the Shelves Cutting to length Assessing the fit Assessing your clamping strategy Glueing and screwing in the shelves at position Install the Base Molding Fitting the moulding Gluing and repainting the molding Leveling the bottom Install the Back Fastening the trunk Finishing Filling and sanding Cleaning Painting
  • ← Prev
  • Back
  • Next →
  • ← Prev
  • Back
  • Next →

Chief Librarian: Las Zenow <zenow@riseup.net>
Fork the source code from gitlab.

This is a mirror of the Tor onion service:
http://kx5thpx2olielkihfyo4jgjqfb7zx7wxr3sd4xzt26ochei4m6f7tayd.onion