101 Labs for the Cisco CCNA Exam · Exam - 200-125 CCNA - 100-105 ICND1- 200-105 ICND2 by Browning, Paul W. -- Read -- Imperial Library of Trantor

Log In

Or create an account ->

Imperial Library

Home
About
News
Upload
Forum

Help

Login/SignUp

Index

Introduction to the 2nd Edition

About the Authors How to Use This Book

Hands-on Options A Note about Interfaces Are You Exam Ready? Help—My Lab Isn’t Working

101 CCNA Labs Video Course

Table of Contents ICND1: 100-105

1.0 Network Fundamentals

Lab 1: Configure, Verify, and Troubleshoot IPv4 Addresses Lab 1: Configuration and Verification Lab 2: Configure, Verify, and Troubleshoot IPv6 Addresses Lab 2: Configuration and Verification Lab 3: IPv6 Address Autoconfiguration Lab 3: Configuration and Verification Lab 4: ARP and Proxy ARP Lab 4: Configuration and Verification

2.0 LAN Switching Fundamentals

Lab 5: Configuring Standard VLANs on Catalyst Switches Lab 5: Configuration and Verification Lab 6: Configuring VTP Clients and Servers on Catalyst Switches Lab 6: Configuration and Verification Lab 7: Configuring VTP Transparent Mode Lab 7: Configuration and Verification Lab 8: Securing VTP Domains Lab 8: Configuration and Verification Lab 9: Configuring Switch Access Port Security Lab 9: Configuration and Verification Lab 10: Configuring Advanced Switch Access Port Security Lab 10: Configuration and Verification Lab 11: Configuring Advanced Static Switch Access Port Security Lab 11: Configuration and Verification Lab 12: Disabling Auto-negotiation of Trunking Lab 12: Configuration and Verification Lab 13: Setting Switchports to Dynamic Lab 13: Configuration and Verification Lab 14: Configuring a Default Gateway for Routers and Switches Lab 14: Configuration and Verification Lab 15: Cisco Discovery Protocol Lab 15: Configuration and Verification Lab 16: Configuring LLDP Lab 16: Configuration and Verification Lab 17: Configuring Errdisable Recovery Lab 17: Configuration and Verification

3.0 Routing Fundamentals

Lab 18: Configuring Inter-VLAN Routing (Router on a Stick) Lab 18: Configuration and Verification Lab 19: Configuring and Allowing Inter-VLAN Routing—SVI Lab 19: Configuration and Verification Lab 20: Configuring Static Routing via Interfaces Lab 20: Configuration and Verification Lab 21: Configuring Static Routing via IP addresses Lab 21: Configuration and Verification Lab 22: Configuring and Naming Static Routes Lab 22: Configuration and Verification Lab 23: Configuring Default Static Routes Lab 23: Configuration and Verification Lab 24: Configuring IPv6 Static Routes Lab 24: Configuration and Verification Lab 25: Configuring IPv6 Default Routes Lab 25: Configuration and Verification Lab 26: Configuring IP Floating Static Routes Lab 26: Configuration and Verification Lab 27: Configuring RIP version 2 Lab 27: Configuration and Verification Lab 28: RIPv2 Automatic Summarization Lab 28: Configuration and Verification Lab 29: Debugging and Verifying RIP Version 2 Updates Lab 29: Configuration and Verification Lab 30: Passive Interfaces for RIPv2 Updates Lab 30: Configuration and Verification Lab 31: RIPv2 Split Horizon Lab 31: Configuration and Verification

4.0 Infrastructure Services

Lab 32: Configuring the Cisco IOS DHCP Server Lab 32: Configuration and Verification Lab 33: Troubleshooting and Configuring DHCP (Client-Server Router-Based) Lab 33: Configuration and Verification Lab 34: DHCP Relay Lab 34: Configuration and Verification Lab 35: Configuring a Router as an NTP Client Lab 35: Configuration and Verification Lab 36: Configuring and Applying Standard Numbered ACLs Lab 36: Configuration and Verification Lab 37: Configuring and Applying Standard Named ACLs Lab 37: Configuration and Verification Lab 38: Configuring and Applying Extended Numbered ACLs Inbound Lab 38: Configuration and Verification Lab 39: Configuring and Applying Extended Named ACLs Inbound Lab 39: Configuration and Verification Lab 40: Configuring and Applying Extended Numbered ACLs Lab 40: Configuration and Verification Lab 41: Restricting Inbound Telnet Access Using Extended ACLs Lab 41: Configuration and Verification Lab 42: Debugging Network Traffic Using Extended ACLs Lab 42: Configuration and Verification Lab 43: ACL Sequence Numbers Lab 43: Configuration and Verification Lab 44: Logging ACL Matches Lab 44: Configuration and Verification Lab 45: Configuring Static Network Address Translation Lab 45: Configuration and Verification Lab 46: Configuring Dynamic Network Address Translation Lab 46: Configuration and Verification Lab 47: Configuring Interface-based Port Address Translation Lab 47: Configuration and Verification Lab 48: Configuring Pool-based Port Address Translation Lab 48: Configuration and Verification

5.0 Infrastructure Maintenance

Lab 49: Configuring Passwords on Catalyst Switches Lab 49: Configuration and Verification Lab 50: Permitting Telnet Access to Catalyst IOS Switches Lab 50: Configuration and Verification Lab 51: Permitting Telnet Access to Catalyst IOS Switches—Login Local Lab 51: Configuration and Verification Lab 52: Permitting Console Access to Catalyst IOS Switches—Login Local Lab 52: Configuration and Verification Lab 53: Configuring an Enable Secret Password and Exec Timeout on Catalyst Switches Lab 53: Configuration and Verification Lab 54: Configuring User Privileges on Cisco IOS Devices Lab 54: Configuration and Verification Lab 55: Configuring Command and Password Privilege Levels on Devices Lab 55: Configuration and Verification Lab 56: Configuring MOTD Banners Lab 56: Configuration and Verification Lab 57: Changing the Configuration Register on Cisco IOS Devices Lab 57: Configuration and Verification Lab 58: Configuring SSH Access/Disable Telnet Access Lab 58: Configuration and Verification Lab 59: Configuring IOS Device Logging to a SYSLOG Server Lab 59: Configuration and Verification Lab 60: Performing an IOS Upgrade Lab 60: Configuration and Verification Lab 61: Performing an IOS Upgrade Using FTP Lab 61: Configuration and Verification Lab 62: Performing Password Recovery Lab 62: Configuration and Verification

ICND1 Challenge Labs

Challenge Lab 1: Static Routes and ACLs Challenge Lab 1: Solution Challenge Lab 2: Static Routes and ACLs Challenge Lab 2: Solution Challenge Lab 3: CDP, Banner Messages, and NTP Challenge Lab 3: Solution Challenge Lab 4: Static NAT Challenge Lab 4: Solution Challenge Lab 5: NAT Pool Challenge Lab 5: Solution Challenge Lab 6: NAT Overload Challenge Lab 6: Solution Challenge Lab 7: Static IPv6 Routes Challenge Lab 7: Solution Challenge Lab 8: Switchport Security Challenge Lab 8: Solution Challenge Lab 9: Trunking and VTP Challenge Lab 9: Solution Challenge Lab 10: DHCP, Inter-VLAN Routing, and RIPv2 Challenge Lab 10: Solution

ICND2 200-105

1.0 LAN Switching Technologies

Lab 63: Configuring Extended VLANs on Cisco Catalyst Switches Lab 63: Configuration and Verification Lab 64: Changing the Native VLAN and Shutting Down Unused Ports Lab 64: Configuration and Verification Lab 65: Restricting Extended VLANs on Trunks and Changing the VTP Version Lab 65: Configuration and Verification Lab 66: Verifying Spanning Tree Port States on Catalyst Switches Lab 66: Configuration and Verification Lab 67: Configuring Spanning Tree Protocol Root Bridges Manually Lab 67: Configuration and Verification Lab 68: Configuring Spanning Tree Protocol Root Bridges Using the IOS Macro Lab 68: Configuration and Verification Lab 69: Assigning Multiple Instances to a VLAN Simultaneously Lab 69: Configuration and Verification Lab 70: Configuring Spanning Tree Protocol for Access Ports (PortFast) Lab 70: Configuration and Verification Lab 71: Enabling Rapid Per-VLAN Spanning Tree Lab 71: Configuration and Verification Lab 72: Configure, Verify, and Troubleshoot EtherChannels (Static/PAgP/LACP) Lab 72: Configuration and Verification Lab 73: Configuring 802.1X Security Lab 73: Configuration and Verification Lab 74: Configuring DHCP Snooping Lab 74: Configuration and Verification

2.0 Routing Technologies

Lab 75: Configuring OSPF on Point-to-Point Networks Lab 75: Configuration and Verification Lab 76: Configuring OSPF on Broadcast Networks Lab 76: Configuration and Verification Lab 77: Configuring the OSPF Router ID Manually Lab 77: Configuration and Verification Lab 78: Configuring the OSPF Passive Interface Manually Lab 78: Configuration and Verification Lab 79: Configuring Single-Area OSPFv3 Lab 79: Configuration and Verification Lab 80: Configuring Multi-Area OSPF Lab 80: Configuration and Verification Lab 81: Debugging OSPF Adjacencies Lab 81: Configuration and Verification Lab 82: Configure, Verify, and Troubleshoot Single-Area and Multi-Area OSPFv3 for IPv6 Lab 82: Configuration and Verification Lab 83: Configuring Basic EIGRP Routing Lab 83: Configuration and Verification Lab 84: Configuring EIGRP Routing Using Wildcard Masks Lab 84: Configuration and Verification Lab 85: EIGRP Automatic Summarization Lab 85: Configuration and Verification Lab 86: Passive Interfaces for EIGRP Updates Lab 86: Configuration and Verification Lab 87: Summarizing Routes with EIGRP Lab 87: Configuration and Verification Lab 88: Verifying the EIGRP Database Lab 88: Configuration and Verification Lab 89: EIGRP Split Horizon Lab 89: Configuration and Verification Lab 90: Configuring EIGRP for IPv6 Lab 90: Configuration and Verification

3.0 WAN Technologies

Lab 91: Configuring Back-to-Back Serial Connections Lab 91: Configuration and Verification Lab 92: Verifying Cisco HDLC Encapsulation Lab 92: Configuration and Verification Lab 93: Configuring PPP Encapsulation Lab 93: Configuration and Verification Lab 94: PPP Authentication Using PAP Lab 94: Configuration and Verification Lab 95: PPP Authentication Using CHAP (Method #1) Lab 95: Configuration and Verification Lab 96: PPP Authentication Using CHAP (Method #2) Lab 96: Configuration and Verification Lab 97: Configuring Multilink PPP (MLPPP) Lab 97: Configuration and Verification Lab 98: Configuring PPPoE Lab 98: Configuration and Verification Lab 99: Configuring eBGP Advanced Lab 99: Configuration and Verification Lab 100: Configuring GRE Point-To-Point Tunnels Lab 100: Configuration and Verification

4.0 Infrastructure Services

Lab 101: Configuring IPv6 Traffic Filters Lab 101: Configuration and Verification Lab 102: Implementing HSRP Lab 102: Configuration and Verification

5.0 Infrastructure Maintenance

Lab 103: Configuring IP SLA Lab 103: Configuration and Verification Lab 104: Configuring SNMPv3 Lab 104: Configuration and Verification Lab 105: Configuring SNMPv2 Lab 105: Configuration and Verification

ICND2 Challenge Labs

Challenge Lab 11: CHAP with PAP Fallback Challenge Lab 11: Solution Challenge Lab 12: Set STP Root Bridge Manually Challenge Lab 12: Solution Challenge Lab 13: Enable RSTP+ Challenge Lab 13: Solution Challenge Lab 14: Easy EIGRP Challenge Lab 14: Solution Challenge Lab 15: OSPF Passive Interfaces Challenge Lab 15: Solution Challenge Lab 16: Multi-Area OSPF Challenge Lab 16: Solution Challenge Lab 17: Multi-Area OSPF with Passive Interfaces Challenge Lab 17: Solution Challenge Lab 18: OSPFv3 Challenge Lab 18: Solution Challenge Lab 19: Multi-Area OSPFv3 Challenge Lab 19: Solution Challenge Lab 20: Multi-Area OSPFv3 with PPP and Logging Challenge Lab 20: Solution

Bonus Labs

Lab A: Configuring and Applying Extended Named ACLs Outbound Lab A: Configuration and Verification Lab B: Restricting Outbound Telnet Access Using Extended ACLs Lab B: Configuration and Verification Lab C: Configuring IOS DHCP Clients Lab C: Configuration and Verification Lab D: Configuring Command Aliases on IOS Devices Lab D: Configuration and Verification Lab E: Configuring Local Name Resolution on Cisco IOS Devices Lab E: Configuration and Verification Lab F: Configuring Domain Name Resolution on Cisco IOS Devices Lab F: Configuration and Verification Lab G: Configuring Command and Password Privilege Levels on Devices Lab G: Configuration and Verification Lab H: Enabling HTTP Access to Cisco IOS Devices Lab H: Configuration and Verification Appendix A: Cabling and Configuring a Frame Relay Switch for Two Routers Appendix B: Cabling and Configuring a Frame Relay Switch for Three Routers

← Prev
Back
Next →

← Prev
Back
Next →

Chief Librarian: Las Zenow <zenow@riseup.net>
Fork the source code from gitlab.

This is a mirror of the Tor onion service:
http://kx5thpx2olielkihfyo4jgjqfb7zx7wxr3sd4xzt26ochei4m6f7tayd.onion