[Gutenberg 20282] • The Working of Steel / Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Colvin, Fred H. -- Read -- Imperial Library of Trantor

Index

THE WORKING OF STEEL PREFACE TO SECOND EDITION PREFACE TO FIRST EDITION CONTENTS INTRODUCTION CHAPTER I

BESSEMER PROCESS OPEN HEARTH PROCESS CRUCIBLE STEEL THE ELECTRIC PROCESS 6-TON HEROULT FURNACE CLASSIFICATIONS OF STEEL

CHAPTER II

PROPERTIES OF STEEL TENSILE PROPERTIES IMPACT TESTS FATIGUE TESTS HARDNESS TESTING

CHAPTER III

NICKEL CHROMIUM NICKEL-CHROMIUM VANADIUM MANGANESE TUNGSTEN MOLYBDENUM SILICON PHOSPHORUS SULPHUR PROPERTIES OF ALLOY STEELS NON-SHRINKING, OIL-HARDENING STEELS EFFECT OF A SMALL AMOUNT OF COPPER IN MEDIUM-CARBON STEEL HIGH-CHROMIUM OR RUST-PROOF STEEL S. A. E. STANDARD STEELS LIBERTY MOTOR CONNECTING RODS PICKLING THE FORGINGS

CHAPTER IV

CARBON-STEEL FORGINGS HIGHLY STRESSED PARTS GEARS RATE OF COOLING CONNECTING RODS CRANKSHAFT PISTON PIN APPLICATION TO THE AUTOMOTIVE INDUSTRY COMPOSITION OF TRANSMISSION-GEAR STEEL HEAT TREATMENT OF AXLES MAKING STEEL BALLS

CHAPTER V

FORGING PLANT FOR FORGING RIFLE BARRELS MACHINEABILITY

CHAPTER VI

ANNEALING OF HIGH-SPEED STEEL TOOL OR CRUCIBLE STEEL ANNEALING ALLOY STEEL HIGH-CARBON MACHINERY STEEL ANNEALING IN BONE ANNEALING OF RIFLE COMPONENTS AT SPRINGFIELD ARMORY

CHAPTER VII

RATE OF ABSORPTION CARBURIZING MATERIAL QUENCHING EFFECT OF DIFFERENT CARBURIZING MATERIAL QUENCHING THE WORK THE QUENCHING TANK REFINING THE GRAIN CASE-HARDENING TREATMENTS FOR VARIOUS STEELS CARBURIZING BY GAS PREVENTING CARBURIZING BY COPPER-PLATING PREPARING PARTS FOR LOCAL CASE-HARDENING THE PENETRATION OF CARBON INTRODUCTION OF CARBON USING ILLUMINATING GAS A SATISFACTORY LUTING MIXTURE GAS CONSUMPTION FOR CARBURIZING THE CARE OF CARBURIZING COMPOUNDS SEPARATING THE WORK FROM THE COMPOUND BLENDING THE COMPOUND

CHAPTER VII

CRITICAL POINTS HARDENING JUDGING THE HEAT OF STEEL HEAT TREATMENT OF GEAR BLANKS THE INFLUENCE OF SIZE HEAT-TREATING EQUIPMENT AND METHODS FOR MASS PRODUCTION DROP FORGING DIES S. A. E. HEAT TREATMENTS HEAT TREATMENTS RESTORING OVERHEATED STEEL

CHAPTER IX

CARBON IN TOOL STEEL CARBON STEELS FOR DIFFERENT TOOLS USES OF THE VARIOUS TEMPERS OF CARBON TOOL STEEL STEEL FOR CHISELS AND PUNCHES CHISELS-SHAPES AND HEAT TREATMENT[1] PREVENTING DECARBONIZATION OF TOOL STEEL ANNEALING TO RELIEVE INTERNAL STRESSES DOUBLE ANNEALING QUENCHING TOOL STEEL HINTS FOR TOOL STEEL USERS PREVENTING CRACKS IN HARDENING SHRINKING AND ENLARGING WORK TEMPERING ROUND DIES THE EFFECT OF TEMPERING ON WATER-QUENCHED GAGES TEMPERING COLORS ON CARBON STEELS

CHAPTER X

STANDARD ANALYSIS QUALITY AND STRUCTURE HARDENING HIGH-SPEED STEELS CUTTING-OFF STEEL FROM BAR LATHE AND PLANER TOOLS FOR MILLING CUTTERS AND FORMED TOOLS INSTRUCTIONS FOR WORKING HIGH-SPEED STEEL LATHE AND PLANER TOOLS HEAT TREATMENT OF LATHE, PLANER AND SIMILAR TOOLS HEAT TREATMENT OF MILLING CUTTERS, DRILLS, REAMERS, ETC. HEAT TREATMENT OF PUNCHES AND DIES, SHEARS, TAPS, ETC. A CHROMIUM-COBALT STEEL SUGGESTIONS FOR HANDLING HIGH-SPEED STEELS HARDENING HIGH-SPEED STEEL

CHAPTER XI

PROTECTIVE SCREENS FOR FURNACES FURNACE DATA

CHAPTER XII

PYROMETERS THE THERMO-COUPLE THE PYROMETER AND ITS USE CALIBRATION OF PYROMETER WITH COMMON SALT THE LEEDS AND NORTHRUP POTENTIOMETER SYSTEM PLACING THE THERMO-COUPLES LEEDS AND NORTHRUP OPTICAL PYROMETER CORRECTION FOR COLD-JUNCTION ERRORS BROWN AUTOMATIC SIGNALING PYROMETER AN AUTOMATIC TEMPERATURE CONTROL PYROMETER PYROMETERS FOR MOLTEN METAL PROTECTORS FOR THERMO-COUPLES

APPENDIX AUTHORITES QUOTED INDEX