Log In
Or create an account ->
Imperial Library
Home
About
News
Upload
Forum
Help
Login/SignUp
Index
Cover
Half Title page
Title page
Copyright page
Introduction
Preface
Symposia Organizers
Ceramic Genome, Computational Modeling, and Design
Design of New Gradient Cemented Carbides and Hard Coatings Through Ceramic Genome
Abstract
Introduction
Establishment of The Ceramic Genome
Experimental
Results and Discussion
Schematical Ceramic Genome
Conclusion
Acknowledgement
References
The Effects of Nesting and Stacking Sequence on the Structural and Gas Transport Properties of Plain Woven Composites during Chemical Vapor Infiltration Process
Abstract
Introduction
The Macro-Pore Model
Results and Discussion
Conclusion
Acknowledgements
References
An Efficient Approach to Determine the Effective Properties of Random Heterogeneous Materials
Abstract
Introduction
Homogenization
Extrapolation
Numerical Results
Conclusion
Acknowledgement
References
Contribution of Image Processing Techniques to the Simulation of Chemical Vapor Infiltration of SiC in CMCs
Abstract
Introduction
Overall Strategy
Image Analysis Tools
Image Synthesis
Infiltration Simulations
Summary and Outlook
Acknowledgements
References
Image-Based Numerical Simulation of Thermal Expansion in C/C Composites
Abstract
Introduction
Material and Characterizations
Strategy and Methods
Results and Discussion
Summary and Outlook
Acknowledgements
References
Analysis and Molecular Modeling of Pyrolytic Carbons Nanotextures
Abstract
Introduction
Materials
Numerical Methods
Results and Discussion
Summary and Outlook
Acknowledgements
References
A New Kinetic Monte-Carlo/Volume-of-Fluid Solver for the Anisotropic Surface Recession of C/C Composites by Ablation
Abstract
Introduction
Method: Principle and Implementation
Test Cases : Presentation and Quasi-Analytic Solutions
Test Results
Application Example
Summary and Conclusion
Acknowledgements
References
Numerical Simulation of Oxidation-Assisted Failure of CMC-SiC at Intermediate Temperature
Abstract
Introduction
Microstructural Characteristics of Micro CMC-SiC
Microstructure Modeling of Oxidized Micro CMC-SiC
Oxidation Kinetics Model
Modelling the Oxidized Microstructure
Computation Method of Stress Distribution and Failure Behavior of Oxidized Micro CMC-SiC
Periodical Boundary Conditions
Failure Analysis Strategy
Numerical Examples
Failure of Micro Sic/Sic
Failure of Micro C/Sic
Conclusion
Acknowledgement
References
Advanced Ceramic Fibers, Interfaces, and Interphases
Suppression of α-Al2O3 Formation from Alumina Gel Fibers by Urea-Catalyzed TEOS-Derived Silica
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
References
Ceramix Matrix Microcomposites Prepared by P-RCVD Within the (Ti-Si-B-C) System
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Fabrication and Properties of Zr/SiC and Zr/Si3N4 Laminated Composites
Abstract
1. Introduction
2. Experiment
4. Conclusion
Acknowledgement
References
Silicon Carbide Fibers Made from Nano-Powders
Abstract
Introduction
Experimental Procedure
Results and Discussion
Conclusions
Acknowledgements
References
Composition and Reactivity of Various Silicon Carbide Fibres
Abstract
Introduction
Conclusions
Acknowledgements:
References:
The Investigation of Pyrolytic Coating on Carbon Monofilament by Cold Wall CVD using Ethanol as Precursor
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
References
Nanocomposite Materials and Systems
Carbon Nanotube-Reinforced Ceramic Matrix Composites: Processing and Properties
Abstract
Introduction
Processing of Cnt-Reinforced CMCs
Mechanical Properties
Functional Properties
Conclusions
Acknowledgment
References
Fabrication of ZAO Ceramic Target and Effect on the Photoelectric Properties of its Film
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
References
Mechanical Properties of Carbon Nanotube Reinforced Composites: A Review
Abstract
Introduction
Research Progress in Cnts/Pmc
Research Progress in Cnts/Mmc
Research Progress in Cnts/Cmc
Summaries and Remarks
Acknowledgements
References
Effect of the Electrodeposition Parameters on Deposition Morphologies of CNTs on Carbon Fibers
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgements
References
Microstructure and Growth Mechanism of SiC Whiskers Synthesized by Carbothermal Reduction of Silicon Nitride
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Polymer Derived Ceramics and Composites
High Temperature Dielectric and Microwave Absorption Properties of Polymer Derived SiCN Ceramic in X Band
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgment
References
SiCN-Nanowhiskers Self-Reinforcing CMC Quasi-3D Structure Forming by PIP
Abstract
1. Introduction
2. Experiments
3. Results and Discussion
References
Ablation Behavior of C/C-Zrb2-SiC Carbon-Ceramic Composites
Abstract
1. Introduction
2. Materials and Methods
3. Results and Discussions
4. Conclusions
References:
Fiber Reinforced Ceramic Matrix Composites
Effect of Heat Exposure on the Flexural Strength of Reinforced Carbon and Glass Fibers Geopolymer Matrix Composites
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Reaction Mechanism of Titanium with Carbon During Reactive Melt Infiltration of a Carbon Fiber Reinforced TiC and Carbon Composite
Abstract
Introduction
Experimental
Result and Discussion
Conclusion
References
Modelling the Behaviour of CMC Using Damage Mechanics
Abstract
Introduction
Crack Network Modelling
Oxidative Damage Modelling
Tensile Test on A Dog-Bone Specimen at High Temperature and Under Oxidizing Environment
Conclusion
References
MMS Technology: First Results and Prospects
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgements
References
Effect of Oxidation Damage on the Totel Emissivity of 2D C/SiC Composites
Abstract
Introduction
Experimental Procedure
Results and Discussion
Conclusion
References:
Effect of Water Vapor on the Oxidation Behavior of CVD-BCx
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgments
References
Microstructure and Mechanical Properties of the 2D C/SiC/Tc4 Joints Brazed with Cu-Ti + Mo
Abstract
1. Introduction
2. Materials and Experimental Procedures
3. Results and Discussion
4. Conclusions
Acknowledgements
References
Uniaxial Macro-Mechanical Property and Failure Analysis of A 2D-Woven Sic/SiC Composite
Abstract
Introduction
Experiment
Stress-Strain Behaviors and Damage Evolution
Mechanical Properties and Failure Mechanisms
Conclusions
References
A Biaxial Flexural Test for Short Carbon Fiber-Reinforced Sic-Matrix Composites
Abstract
Introduction
Experimental
Results and Discussion
Summary
Acknowledgement
References
C/C-SiC Materials Based on Melt Infiltration - Manufacturing Methods and Experiences from Serial Production
Abstract
Cmc Manufacturing Via Melt Infiltration
Properties of Mi Derived C/SiC and C/C-SiC
Applications of Mi Derived C/C-SiC and C/SiC
Development of Brake Pads for the Propeller Brake of A400M
Experiences from Pre-Series Manufacture
Summary
References
Internal Friction Behavior of SiC Ceramics Subjected to Water Vapor Corrosion
Abstaract
Introduction
Experimental
Results and Discussion
Conclusion
References
Fatigue Behavior of C/SiC Ceramic Matrix Composites at Room and Elevated Temperatures
Abstract
Introduction
Material and Experimental Procedures
Experimental Results
Hysteresis Theory and Fatigue Life Prediction Model
Experimental Comparisons
Conclusion
Acknowledgement
References
The Effects Originated from Low Earth Orbit Thermal Cycling and Atomic Oxygen on C/SiC Composites
Abstract:
1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusion
Acknowledgements
References
Processing and Properties of the C/SiBCN Ceramic Matrix Composites Prepared by PIP
Abstract
Introduction
Experiment
Results and Discussion
Conclusion
Acknowledgement
References
Analysis and Characterization of Amorphous Boron Carbide Coatings Deposited from BCl3-CH4-H2 Mixtures
Abstract
1. Introduction
2. Experiment Procedure
3. Results and Discussion
4. Summary
Acknowledgments
References
Chemical Vapor Deposition of Boron-Doped Carbon Coating from BCl3-C3H6-H2Ar Gas Mixture
Abstract
1. Introduction
2. Experimenal
3. Results and Discussion
4. Conclusions
Acknowledgments
References
Preparation and Mechanical Properties of 3D-Cf/Mullite Composites Fabricated by Sol-Gel Process
Abstract:
1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusions
Acknowledgement
References
An Alternative to Ceramic Matrix Composites
Abstract
Introduction
Experimental
Conclusions
Acknowledgements
Fabrication of Short Fiber Reinforced SiCN by Injection Molding of Preceramic Polymers
Abstract
Introduction
Experimental Materials
Characterization Methods.
Sample Preparation.
Results and Discussion
Compound Development.
Compound Preparation.
Sample Characterization.
Microstructure
Conclusions
Acknowledgement
References
X-CVI (with X = I or P), A Unique Process for the Engineering and Infiltration of the Interphase in SiC-Matrix Composites: An Overview
Abstract
Introduction
Interphase Concept as Applied to Sic/SiC Composites
Cvi: A Unique Process to Engineer the Interphase in Sic/SiC Composites
Conventional Interphases
Other Potential Interphases
Conclusions
References
Temperature Effect on C/SiC Composite with SiC Nanowires Grown in Situ
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgement
References
Evaluation of Different Carbon Precursors for the Liquid Silicon Infiltration Process
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Microstructure and Mechanical Properties of C/C-SiC Composites Reinforced with Fibers Treated at Elevated Temperatures
Abstract
Introduction
Experimental Procedure
Results and Discussion
Summary
Acknowledgments
References
Oxidation Behavior of C/C-SiC Composites with Varied Matrix Composition
Abstract
Introduction
Experimental
Results and Discussion
Summary
Acknowledgments
References
Evaluation and Validation of Elastic Properties and a Failure Criterion for an Oxide Wound Ceramic Composite Material
Abstract
1 Introduction and Motivation
2 Modeling Approach
3 Experimental
4 Results and Discussion
5 Conclusions
References
Mechanical and Ablation Properties of Ultra-High Temperature Composites with a Variable Matrix-Composition
Abstract
1. Introduction
1. Experimental
3. Results and Discussion
4. Conclusions
References:
Carbon-Carbon Composites: Materials, Systems, and Applications
Effects of Preform Structures on Rhenium Coating Prepared on C/C Composites by Chemical Vapor Deposition
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References
Application Status of C/C Composites for Thermal Protection System in Re-Entry Spacecraft
Abstract
1. Introduction
2. Fabrication Process
3. Conclusion
4. References:
Techniques about Fabrication of Thin-Wall Preforms with Complex Shape for Ceramic Composites
Abstract
1 Introduction
2 Preform Fabrication Technologies
3 Conclusion and Future Work
4 Acknowledgments
Reference
Carbon/Carbon Greenbodies for Space Mirrors and Their Thermal Performance
Abstract
1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusion
Reference
Oxidation Behavior of SiC Reinforced ZrB2 Composite Coating Prepared by Low Pressure Plasma Spray
Abstract
Introduction
Experiments
Results and Discussions
Conclusions
Acknowledgement
Reference
Structural Analysis of Carbon-Fiber / Pyrolytic Carbon Matrix Composites
Abstract
Introduction
Results and Discussion
Conclusion
Acknowledgment
References
Preparation of β-Sialon Anti-Oxidation Ceramic Coating for C/C Composites and Infrared Stealthy Characteristic
Abstract
Introduction
Experimental
Results and Discussion
Infrared Stealthy Characteristic
Conclusion
Acknowledgement
References
Ultra High Temperature Ceramics and MAX Phase Materials
Effect of Carbon Content on the Formation of Ti3SiC2 in the Liquid Silicon Infiltration Process
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Modification of Titanium Carbide Powders by Silicidation with Gaseous SiO
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Combustion Synthesis of Ti3SiC2-Based Ceramic Matrix Composites Using Non-Powder Reactant Solids
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgements
References
Microstructure Evolution of α-SiC in the Liquid Phase Sintering Process
Abstract
Introduction
Experimental
Result and Discussion
Conclusion
References
Mechanical Properties and Thermal Shock Resistance of Anisotropic Zrb2-SiC-Graphite Ceramic
Abstract
Introduction
Experimental Procedures
Theoretical and Numerical Calculation
Results and Discussion
Conclusions
Acknowledgement
References
Ablation Behavior of Zrb2/SiC Composite by Oxyacetylene Flame
Abstract
1 Introduction
2 Experiment Procedures
3 Results and Discussions
4 Conclusions
References:
Synthesis of Zrc-Zrb2 Composite Powders by Pirac Method
Abstract
Introduction
Experimental Procedure
Results and Discussion
Conclusion
Acknowledgement
References
Thermal and Environmental Barrier Coatings
Formation of Fine Ceramics Layer and Intermetallics Network by Thermal Nanoparticles Spraying and Pattering
Abstract
Introduction
Experimental Procedure
Results and Discussions
Conclusion
References
Formation of Inter-splat Bonding and Intra-splat Microstructure During Plasma Spraying of Ceramic Coating
Abstract
Introduction
Splat Cooling Features During Plasma Spraying
Inter-Splat Interface Bonding
Effect of Inter-Splat Bonding and Deposition Temperature on the Intra-Splat Microstructure
Summary
Acknowledgements
References
Preparation and Ablation Properties of Zrc-Tac Co-Deposition Coating for Carbon-Carbon Composites
Abstract:
1. Introduction
2. Experiment
2 Results and Discussion
3. Conlusions
Acknowledgments
References
Phase Stabilities and Corrosion/Recession Properties of Rare Earth Silicates Under High Speed Steam Jet
Abstract
Introduction
Experimental
Results and Discussion
Summary
References
Integration Technologies, Component Testing, and Evaluation
Wettability in Joining of Advanced Ceramics and Composites: Issues and Challenges
Abstract
Introduction
Wettability
Infiltration
Brazing of CMCs: General Considerations
Conclusions
References
Study on the Ablation Behavior of 3D Needled C/SiC in the Rocket Combustion Environments
Abstract
Introduction
Experimental Procedures
Results and Discussion
Conclusion
References
The Degradation of Hi-Nicalon Monofilament after Proton Irradiation
Abstract
Introduction
Experimental Procedure
Results and Discussion
Conclusions
Acknowledgements
References
Damage Evaluation in Glass-Ceramic Matrix Composites Via Combined Infrared Thermography and Acoustic Emission
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgment
References
Hybrid Ceramic – Metallic Composite Pipes for High Temperature Power Plant Application
Abstract
Introduction
Numerical and Experimental Work
Results and Discussion
Conclusion
Acknowledgement
References
An Experimental Investigation on Shear Behaviors of Single-Lap Four-Pin 2D C/SiC Joints
Abstract
1. Introduction
2. Experimental Details
3. Results and Discussion
4. Conclusions
Acknowledgements
References
The Effect of Dimension Parameters on the Tensile Properties of A C/SiC Pipe
Abstract
Introduction
Experiment
Result and Analysis
Conclusion
Acknowledgment
References
The Application Research of New Testing Technique on Mechanical Experiment for Large-Size CMC Structure
Abstract
Introduction
Application of the Wireless Laser Measuring Technique in Thermal Modal Test of CMC Structure
The Characteristics of Acoustic Emission Test for CMC Material
Applications of High Temperature Acoustic Emission Technique(Htae) to Ground Test of CMC Large Scale Structure
Conclusion
References
Joining of Glassy Carbon with A C/C-SiC Composite by Brazing for an Innovative High Temperature Sensor
Abstract
Introduction
Experimental
Results
Discussion
Conclusion
Acknowledgement
References
Strengthening/Toughening of Laminated (Sicw+Sicp)/SiC Ceramic Composites
Abstract
Introduction
Experimental
Results and Discussion
Conclusion
Acknowledgement
References
Mechanical Properties of Carbon/Silicon Carbide Composites Materials Bolts
Abstract
Introduction
Test
Results
Conclusions
Reference
Development of Full Scale Ramjet Nozzle with C/SiC Ceramic Matrix Composite
Abstract
Introduction
Working Conditions
Manufacturing Process
Analysis for Failure of Nozlle Hydraulic Pressure Test
Ablation Behavior
Deposition Properties
Conclusions
Reference
Author Index
← Prev
Back
Next →
← Prev
Back
Next →