Contents

Cover

Half Title page

Title page

Copyright page

Preface

Green Technologies for Materials Manufacturing and Processing

Comparison of the Nanosecond Pulse and Direct Current Charging to Develop the Strongly Charged Electret

Abstract

Introduction

Experimental

Results and Discussion

Conclusion

References

Proportioning Controlled Low Strength Materials Using Fly Ash and Ground Granulated Blast Furnace Slag

Abstract

Introduction

Materials and Methods

Aim and Scope of Investigation

Phenomenological Model for Flow & Strength Data

Results and DiscussionS

Conclusion

References

Tensile and Fatigue Testing of 304 Stainless Steel after Gaseous Hydrogen Exposure

Abstract

Introduction

Procedure

Results

Discussion

ConclusionS

Acknowledgments

References

Large Porous Iron Oxide Particles Synthesized from Hydrated Iron Phosphate Particles of Strengite

Abstract

Introduction

Experimental

Results and Discussion

ConclusionS

Acknowledgement

References

SiC Crystal Growth at Low Temperatures Derived From Polycarbosilane with Boron Carbide Additive

Abstract

Introduction

Experimental Procedure

Results and Discussion

Conclusion

References

Developing Yttria-Based Ceramics having High Liquid Metal Corrosion Resistance

Abstract

Introduction

Experimental

Results and Discussion

Conclusion

References

Normal Sintering of Ca₃(VO₄)₂ and its High-Temperature Dielectric Properties

Abstract

Introduction

Experimental

Results and Discussion

ConclusionS

References

Injection of BOF Dust into the Blast Furance Through Tuyere

Abstract

Introduction

1 Experiment

2 Results and Discussions

3 Conclusions

Acknowledgements

References

Green and Reliable Macro-Porous Ceramic Processing

Abstract

Introduction

Materials and Techniques

Results and Discussion

ConclusionS

References

Characterization of Large Scorodite Particles Synthesized from Fe(II) and As(V) Solution

Abstract

Introduction

Experimental

Results and Discussion

Conclusions

Acknowledgement

References

Materials Issues in Nuclear Waste Management

Advanced Steels for Accident Tolerant Fuel Cladding in Commercial Nuclear Reactors

Abstract

Introduction

Experiments and Results

Discussion

Summary and Conclusions

Acknowledgments

References

Spark Plasma Sintering of Neodymium Titanate Pyrochlore for Advanced Ceramic Waste Forms

Abstract

Introduction

Experimental Procedure

Results and Discussion

ConclusionS

Acknowledgements

References

Experimental Investigation and Mathematical Modeling of Cold Cap Behavior in High-Level-Waste Glass Melter

Abstract

Introduction

Reaction Kinetics

Mathematical and Physical Modeling

ConclusionS

Acknowledgment

References

The Effects of Glass Doping, Temperature and Time on the Morphology, Composition, and Iron Redox of Spinel Crystals

Abstract

Introduction

Materials

Methods

Results and Discussion

ConclusionS

Acknowledgment

References

The UK’s Radioactive Waste and Waste Management Programme

Abstract

Introduction

Radioactive Waste Classification

Sources of Radioactive Wastes

Managing Controlled Wastes

Summary

References

Corrosion Behavior of Container Alloys in Nuclear Waste Repositories

Abstract

Introduction

Worldwide Characteristics of the Proposed Repositories

Degradation Modes of the Engineering Metallic Materials

Summary and Conclusions

References

Evolved Gas Analysis for High-Alumina High Level Waste Feed

Abstract

Introduction

Experimental

Results

Discussion

ConclusionS

Acknowledgements

References

Melt-Processed Multiphasic Ceramic Waste Forms

Abstract

Introduction

Experimental Procedure

Results and DiscussionS

Conclusion

Acknowledgements

References

Materials and Systems for Energy Applications

Ionic Conductivity of Gd-RE (RE = RARE EARTH = Pr, Nd, Eu and Er) CO-Doped CeO₂ Electrolytes Prepared by Mechanical Alloying and PECS

Abstract

Introduction

Experimental Procedure

Results and Discussion

Conclusions

Acknowledgements

References

Surface Effects in Beta-Alumina Synthesis and Sintering

Abstract

Introduction

Results and Discussion

ConclusionS

References

Commercial Phase Change Material for Thermal Energy Storage Applications with only PCM and Metal Foam Infiltrated PCM in a Latent Heat Thermal Energy Storage System

Abstract

Introduction

Problem Modeled

Mathematical Model and Governing Equations

Boundary Conditions

Results and Discussion

Conclusions

References

Phase Change Thermal Energy Storage and Recovery in a Complex-Shaped Double Pipe Heat Exchanger

Abstract

Introduction

Problem Modeled

Model Assumptions

Mathematical Formulation

Boundary Conditions

Solution Procedure

Results and Discussion

Conclusions

References

Encapsulating Battery Components with Melting Gels

Abstract

Introduction

Battery Requirements

Melting Gels as Sealing Glasses

Evaluating Melting Gels as Seals

Temperature Dependence of Gas Transport in Melting Gels

Effect of Electrolytes

Summary

References

Nanotechnology for Energy, Healthcare and Industry

Preparation and Characterization of Zinc Substituted Cobalt Ferrite Nano-Particles by Citrate Gel Method

Abstract

1. Introduction:

2. Experimental Procedure:

3. Results and Discussion:

4. Conclusion:

Acknowledgements:

References:

Effect of Drying Time and Temperature on the In-Plane and Thru-Plane Electrical Properties of Multiwalled Carbon Nanotube Films Deposited on Paper Substrates Using a Unidirectional Drying Method

Abstract

Introduction

Materials and Methods

Results and Discussion

Conclusions

Acknowledgements

References

The Effect of Additive on NO_x Emission During Thermal Decomposition of Nano-Recrystallised Nitrate Salts

Abstract

Introduction

Experimental

Discussion

Conclusions

Acknowledgments

Footnotes

References

Author Index